EDO

A unique way of spreading heat:
The heat, produced by a boiler or a heat pump, is spread through the room by the Greenor via gentle ventilation at very low speed around its frame, which has a 492 cm perimeter. The comfort is completed by the soft radiance of its Olycale stone front.
This horizontal, very even diffusion reduces the hot-ceiling, cold-floor effect of conventional convection. It also avoids the burnt dust that blackens the wall above a radiator.

A unique way of spreading coolness:
The coolness, produced by an external reversible heat pump, is spread by the Greenor through a light, fresh airflow at very low speed around its frame, which has a 492 cm perimeter. The comfort is completed by the cool radiance of the Olycale stone.
This horizontal diffusion at very low speed across 492 cm avoids any draught sensation, unlike a conventional split air conditioning unit. It spreads the cooled air evenly and gently all around you.

Greenor is the quietest reversible heating-and-cooling radiator in the world (sound pressure of 14.8 dB, first speed at 1 metre from the unit.)

Greenor® is an international patent, PCT/FR2010/00321, held by Ateliers CINIER.

The Greenor ventilated radiator works with circulating water.

Greenor models therefore use no refrigerant gas (a pollutant for the environment), unlike conventional air conditioning systems.

Greenor thus offers a cooling or heating system that is far more ecological and kinder to our planet.

Greenor can be connected to a conventional generator (a standard or low-temperature boiler, for heating only) or a reversible generator running on renewable energy (heat pumps, solar thermal, geothermal, biomass, etc.).

Greenor uses direct-current micro-fans with very high energy efficiency (average consumption of 10 W), making it one of the most efficient fan coil units in the world.

The Greenor can be used in several ways:

• As a replacement for existing hydronic radiators or fan coils (renovation)
• or as part of a new installation (new build)

Settings:

• High-end private homes
• Luxury flats
• Restaurants, boutiques, hotels
• Residence lobbies, large entrance halls
• High-end offices

and any other setting where the architecture aims for comfort, energy efficiency and beautiful design.

Greenor comes in two versions:

• Greenor heating only
• Greenor reversible, with heating and cooling
  

• Greenor is fitted with 4 high-performance filters that clean the air and keep its quality at its best.
• An exclusive feature: the Greenor filters can be cleaned without a technician. They can be removed or replaced very easily.
  

Greenor comes as standard with:

An infrared remote control: easy to use

It lets you:

• Choose the fan speed (1/2/3 or automatic)
• Set the target temperature
• Programme a comfort temperature

Optional: a wall thermostat can be supplied, fixed to the wall and wired to the Greenor.

It lets you:

• Choose the fan speed (1/2/3 or automatic)
• Control the target temperature
• Control one or several Greenor units with a single thermostat (for example, several Greenor units in a large space).
• The IR remote can also be used alongside the wall thermostat (to set up a programme, for instance).

On request, for hotels for example, the Greenor can be supplied bare, without a thermostat, so the client can use their own building management system or their own thermostat.



It lets you:

Choose the fan speed (1/2/3 or automatic)
Control the target temperature
Control one or several Greenor units with a single thermostat (for example, several Greenor units in a large space).
The IR remote can also be used alongside the wall thermostat (to set up a programme, for instance).
On request, for hotels for example, the Greenor can be supplied bare, without a thermostat, so the client can use their own building management system or their own thermostat.

Yes, the Greenor can be connected to any brand of air-to-water heat pump: Panasonic / Daikin / Hitachi / Mitsubishi / Carrier….

For the heating-only version, the Greenor can be connected to any boiler brand on the market: Viessmannn, Dedietrich, Boch, Frisquet…..

The Greenor runs on water (hot or cold), so it is universal and easy to install on any system.

Showcase a benefit of your productYes, the Greenor decorative front can be replaced or swapped after installation.

Without changing the technical setup or touching the water or electrical connections, you can order a new decorative panel made by Ateliers Cinier

Greenor comes with an international warranty of 5 years on the heating element and 2 years on the electrical accessories.

Greenor is made with the best possible raw materials and components

EBP-PAPST fans
Honeywell valves
Every component can be replaced.

The front is made of Olycale stone with natural pigments: its lifespan is unlimited.

The Greenor units are made in France, in the Ateliers CINIER in Sète (34).

Our skilled craftspeople ensure the very best quality.

The Greenor can be installed by a heating engineer or an air conditioning installer. These professionals, who know how to install air-to-water heat pumps or boilers, will easily connect the Greenor.

For the installation, the installer needs to plan water inlets (flow and return) as well as an electrical supply. The connection diagrams are available in our catalogues or simply on request from Ateliers Cinier.

For the reversible version, the installer needs to insulate the pipes between the Greenor and the heat pump, and to provide an outlet to drain the condensate. A condensate lift pump is available as an option.

You can order a Greenor through your heating installer, an approved CINIER reseller or by contacting us.

To find us.